High Strength Surface Coating
EPiC PolyCryl is a high strength, solvent-based, functional acrylic 2 pack coating which provides excellent protection to concrete, timber, masonry and primed metal surfaces. EPiC PolyCryl has been developed to provide excellent interior and exterior durability with functional benefits of hardness, abrasion and scuff resistance for a wide variety of applications.
EPiC PolyCryl provides superior protection against petrol, oil, fatty oils, acid, alkali and is ideally suited as a sacrificial anti-graffiti finish.
Excellent interior and exterior durability
Excellent adhesion and hardness
High resistance to corrosion and abrasion
Impervious to water and moisture
For detailed substrate preparation and application steps, please download the PolyCryl application guide.
Roller or Brush.
Do not store the mixed product in spray equipment to avoid damage.
Prepare bare concrete surfaces using Nu-EcoSafe Etch or Nu-EcoSafe Ultra Etch following the recommendations in the relevant TDS. Allow surface to thoroughly dry prior to application.
Mixing 3 Parts A to 1 Part B (single 2 Pack kit). Mix using a drill mixer, hand siring is not sufficient. Leave to stand for 10 minutes prior to use to allow full activation.
Do not use after pot life has expired (8 hours).
For spray application thin 10% – 15% with X-5 Solvent. Do not thin for brush or roller application.
Bare concrete and masonry surfaces thin 20% – 25% with X-5 Solvent for first coat application for increased penetration and adhesion.
Roller or brush: Apply 2 even coats, observing minimum film thickness recoat and dry times as outlined in the TDS
Spray: Apply 2-3 even coats, observing minimum film thickness, recoat and dry times as outlined in the TDS
Drying and Curing
EPiC PolyCryl should be touch dry and able to be recoated after 4 hours. For a full cure, allow drying for 7 days.
Clean all surfaces and equipment using X-5 Solvent.